Garmin GPSMAP 6212 - Manual (Page 58)

 GPSMAP ® 6000/7000 Series Owner’s Manual
Almanac, Environmental, and On-boat Data
4. Select the gauge limit you want to set ( Scale Minimum , Scale Maximum , Rated Minimum , or
Rated Maximum ).
5. Select on .
6. Enter the gauge limit:
For the GPSMAP 6000 series, use the Rocker.
For the GPSMAP 7000 series, use the on-screen keyboard.
7. Repeat steps 4 through 6 to set additional gauge limits.
Activating Engine and Fuel Gauge Status Alarms
If you have activated gauge status alarms, when the engine sends a warning state message over the
NMEA 2000 network, a gauge status alarm message appears. The gauge face or bar may become red
depending on the alarm type.
From the Home screen, select Information > engines > Menu > Gauge Setup > Status Alarms
> on .
Customizing Engine and Fuel Gauge Status Alarms
1. From the Home screen, select Information > engines > Menu > Gauge Setup > Status Alarms
> Custom .
2. Select one or more engine gauge or fuel gauge alarms.
3. Select
Back .
Selecting the Engine Gauge Type
You can set the type of gauges that appear on the first engine gauge page. If you have one or two
engines, you can view either analog or digital gauges. If you have three or more engines, you can
view only digital gauges.
From the Home screen, select Information > engines > Menu > Gauge Setup > Style .
Digital Gauges Analog Gauges
Selecting the Number of Engines Shown in Gauges
The digital engine gauges can show information for up to four engines. The analog engine gauges
can show information for up to two engines.
1. From the Home screen, select
Information > engines > Menu > Gauge Setup > engine
Selection > Num. engines .
2. Select the number of engines.
3. Select
Back .
•
•