Radar overlay, Bluechart g2 vision – Garmin GPSMAP 6212 User Manual

Page 27

Advertising
background image

GPSMAP

®

6000/7000 Series Owner’s Manual



Charts and 3D Chart Views

Showing and Configuring Data Bars

See “Data Bars” (

page 62

).

Using Waypoints and Tracks

See “Waypoints” (

page 34

) or “Tracks” (

page 39

).

Radar Overlay

When you connect your chartplotter to an optional Garmin marine radar, you can use Radar Overlay

to overlay radar information on the Navigation chart or on the Fishing Chart (

page 83

).

BlueChart g2 Vision

An optional, preprogrammed BlueChart g2 Vision data card allows you to get the most out of your

chartplotter. In addition to detailed marine charting, BlueChart g2 Vision has the following features:

Mariner’s eye 3D—provides a view from above and behind the boat for a three-dimensional

navigation aid. The BlueChart g2 Vision Mariner’s Eye 3D is more detailed than the pre-loaded

data (

page 22

).

Fish eye 3D—provides an underwater, three-dimensional view that visually represents the

sea floor according to the information on the chart (

page 24

).

Fishing Charts—shows the chart with enhanced bottom contours and without navigational data.

This chart works well for offshore deep-sea fishing (

page 24

).

High Resolution Satellite Imagery—provides high-resolution satellite images for a realistic

view of the land and water on the Navigation chart (

page 25

).

Aerial Photos—shows marinas and other navigationally significant aerial photos to help you

visualize your surroundings (

page 26

).

Detailed Roads and PoI data—shows roads, restaurants, and other points of interest (POIs)

along the shore (

page 27

).

Auto Guidance—uses specified safe depth, safe height, and chart data to determine the best

course to your destination (

page 27

).

BlueChart g2 Vision Data Cards

NOTICE

BlueChart g2 Vision data cards are not waterproof. When you are not using the card, keep it in

the original packaging for safekeeping and store it away from exposure to sun and rain to prevent

damage to the card.
BlueChart g2 Vision data cards are susceptible to damage from static electricity. In low-humidity

environments, you should ground yourself on a large metal object before handling the card to

prevent damage to the card.
You can share BlueChart g2 Vision cartography data from a data card inserted in one GPSMAP 6000

or GPSMAP 7000 series chartplotter with every GPSMAP 4000 series, 5000 series, 6000 series,

and 7000 series chartplotter connected to the Garmin Marine Network (

page 116

). BlueChart g2

Vision cartography is compatible only with GPSMAP 4000 series and later chartplotters. Previous

Garmin Marine Network-compatible chartplotter models (such as the GPSMAP 3000 Series) can be

connected to your network, but they cannot share BlueChart g2 Vision data.

Advertising
This manual is related to the following products: