Garmin GPSMAP 6212 - Manual (Page 77)

GPSMAP ® 6000/7000 Series Owner’s Manual 7
Device Configuration
Backing Up Data to a Computer
1. Insert a memory card into the SD card slot on the chartplotter.
2. From the Home screen, select
Information > User Data > Data transfer > Card > Save to
Card .
3. Complete one of the following actions to indicate the name of the file to be backed up:
Select a file name from the list.
Select
Add New File to create a new file. Enter the file name. Select Done .
4. Select Save to Card .
The file name is saved with an .ADM extension.
5. Remove the memory card from the chartplotter and insert it into an SD card reader attached to a
computer.
6. From Windows ® Explorer, open the Garmin\UserData folder on the memory card.
7. Copy the backup file on the card and paste it to any location on the computer.
Restoring Backup Data to a Chartplotter
1. Insert a memory card into an SD card reader that is attached to the computer.
2. Copy a backup file from the computer to the memory card, into a folder named Garmin\UserData.
3. Insert the memory card into the SD card slot on the chartplotter.
4. From the Home screen, select
Information > User Data > Data transfer > Card > Replace
From Card .
Networked Device Configuration
Viewing Connected Garmin Marine Network Devices
From the Home screen, select Configure > Communications > Marine Network .
Each connected device is listed along the left side of the screen.
Assigning a Name to a Garmin Marine Network Device
1. From the Home screen, select Configure > Communications > Marine Network .
2. Select a device.
3. Select
Review .
4. Enter a name for the device:
For the GPSMAP 6000 series, use the Rocker.
For the GPSMAP 7000 series, use the on-screen keyboard.
5. Select Done .
•
•
•
•