GE Advantium ZSC1202SS - Manual (Page 18)

18
ASSEMBLING THE OVEN TO DRAWER
(cont.)
Remove the front two bottom screws on each
side of the oven and the top center screw on
each side of the storage drawer.
Place the side supports into the tabs on the
drawer and secure using the screws supplied
and the screws removed in Step C.
The oven and storage drawer assembly is now
ready to be installed. Return to the Advantium
120V or 240V Built-In SpeedCook Oven
Installation Instructions to complete
the installation.
C
E
D
Side
Support
120v only
ASSEMBLY TO ADVANTIUM BUILT-IN SPEEDCOOK OVEN