Grizzly Model H8222 - Manual (Page 12)

Model H8222 Spray Gun -11 -
Lubrication
Lubricate the following areas with a non-
silicon spray gun lubricant after cleaning.
A. Atomizing Cap Threads
B. Air Valve Packing
C. Trigger Pin
D. Pattern Control
E. Fluid Control Knob
F. Air Flow Control Knob
Allow the lubricant to coat threads, and run
into gun body to lubricate all moving parts
and seals.
Figure 15. General lubrication points.
A
B
C
D
E
E