GE 45601 - Manual (Page 11)

Removing a Light (Device / Node) from a Scene:
This only removes the device from a specific scene. The device is still
part of your home control network and the scene still exists (if there were
more than one device in it to start).
Press and hold SETUP until screen displays LGHT SETUP.
Use either Arrow key to scroll until the display reads SCN SETUP.
Press OK followed by either Arrow key until the display reads
REMOVE.
Press
OK and the screen will display SEL DIGIT.
Press a digit (1-9) for the scene you wish to remove the device from.
Press SHIFT and the digit (1-9) if you are removing devices from
scenes 10 through 18.
Press the
OK key and the screen will display SETUP WAITING.
Press the button on the device that you wish to remove.
When the screen displays
SUCCESS, you have successfully removed
the device from the scene.
Deleting a Scene:
This only deletes the specific scene. All of the devices are still part of your
home control network.
Press and hold SETUP until screen displays LGHT SETUP.
Use either Arrow key to scroll until the display reads SCN SETUP.
Press OK followed by either Arrow key until the display
reads DELETE.
Press OK and the screen will display SEL DIGIT.
Press a digit (1-9) for the scene you wish to delete. Press SHIFT and
the digit (1-9) if you are deleting scenes 10 through 18.
The screen will display the selected Scene, press the
OK key and the
screen will display SUCCESS.
LABELS
Individual
LIGHTS, GROUPS or SCENES can all be labeled to help identify
their function or location in your home. The process is the same for all
three.
Press and hold SETUP until the screen displays LGHT SETUP. Scroll
to GROUP or SCENE if changing those labels.
Press OK and the screen will read ADD.
Use either Arrow key to scroll until the display reads LABEL.
Press OK and screen will display SEL DIGIT.
Press a digit (1-9) for the LIGHT, GROUP or SCENE you wish to
rename. Press SHIFT and the digit (1-9) if you are re-naming 10
through 18.
The screen will display the selected
LIGHT, GROUP or SCENE.
Use the #1 On/Off key to scroll through the alphabet/numbers until
you reach the appropriate letter or number.
Use the right Arrow key to move to the next letter and repeat step 7.
Continue this process until your new label is complete.
Press the
OK key and the screen will display SUCCESS.
ALL-ON and ALL-OFF Control
The factory default setting for GE Z-Wave lighting control devices is to be
included in All-On and All-Off control. Other brands of Z-Wave enabled
lighting control devices may have to be manually added to All control.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.