GE 2-9950 - Manual (Page 6)

6
D
ESKTOP
I
NSTALLATION
1
2
1. Make sure base plate is securely
fastened.
2. Plug the power supply cord into
the POWER 9V DC jack on the
base and into an AC outlet. The
LED indicators will all light up.
This is normal operation. The
LEDs will go out after about 30
seconds.
3. Place handset in the base to
charge for 12 hours. The
CHARGE/IN USE light (on the
base) comes on to indicate that
the battery is charging. If you
don’t charge the handset battery
properly (for 12 hours) when you
first set up the phone, perfor-
mance of the battery will be
compromised.
3
4
NOTE: Use only the Thomson
5-2420 power supply that is
compatible with this unit. Using
other adapters may damage the
unit.
4. Plug the telephone line cord into the PHONE LINE jack on the base and
into a modular jack.