GE 25203 - Manual (Page 27)

2
Direct Access Memory & Directory Memory
Storing a Name and Number in Memory
1. Press the Store button. ENTER DIGIT shows in the display.
2. Use the touch-tone pad to enter the number you want to store (up to 32 digits).
NOTE: If you make a mistake, use the 34 button to position the cursor and press Delete to erase an
incorrect digit OR directly input another digit to replace the incorrect digit.
3. Press the Sel/Save button.
4. Use the touch-tone pad to enter a name (up to 21 characters). More than one letter
is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key
twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times
for the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key
twice to insert a space between the first and last name. Press the 7 key 4 times for the
letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I;
press the 8 key for the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake, press Delete to erase an incorrect letter and re-enter the correct letter.
5. Press the Store button. LOCATION? shows in the display.
6. Enter the memory location :
• Press the Directory button to save the record in Directory Memory
-OR-
• Press a Memory button to save the record in Direct Access Memory.
7. For future reference, write the name or number of the parties stored in each location
on the corresponding spaces on the memory index card.
Memory