GE 25203 - Manual (Page 31)

31
Display Messages
The following special messages indicate the status of a message or the unit:
NO CALLS
The CID memory log is empty.
UNKNOWN CALLER The incoming call does not have CID service or their service area
is not linked to yours. If UNKNOWN CALLER appears along with a
calling number, the name information for that number was not
available.
BLOCKED CALL The caller is registered as “Private Number” and their CID
information is withheld.
INCOMPLETE DATA Caller information has been interrupted or corrupted during
transmission.
NO DATA No CID signal has been detected, or CID service has not been
activated.
START/ED You are at the beginning or the end of the CID memory log.
Battery power level is low or battery is not installed.
AC POWER IS OFF The power adaptor is unplugged.
Other Information