Goodmans GDB20TTS - Manual (Page 12)

Getting started
12
Connect the RF cable (we have provided one) between the ‘RF out’ socket on the 4
set-top box and the aerial socket on the DVD or VCR. Also connect a second RF
cable between the DVD or VCR and the ‘aerial’ socket on the TV. These cables will
allow you to watch TV programmes as you did before but with the set-top box
connected.
Connect a cable which has a Scart connector at each end (we have provided one) 5
between the ‘TV’ socket on the back panel of the set-top box and the ‘Scart’
socket on your TV. If there is more than one ‘Scart’ socket on the TV, look in your
TV instruction manual to check which one you should use.
Connect a cable which has a Scart connector at each end (we have not provided 6
this) between the ‘VCR or DVD’ socket on the back panel of the set-top box and
the ‘Scart’ socket on your DVD or VCR.
Plug the AC/DC adapter into a mains socket and then plug the connector on the 7
adapter into the ‘5V DC in’ connector on the back panel of the set-top box as
shown opposite.
Plug the TV mains lead back into the mains socket. 8
How to connect headphones
Connect the 3.5 mm stereo jack plug on your headphones into the headphone socket on
the back of the set-top box, see below.
AERIAL VCR/DVD TV
5V DC IN
2.0A RF OUT
+ -
Goodmans GDB20TTS_Instruction Manual.indb 12 6/15/2010 4:26:29 PM