Goodmans GDB20TTS - Manual (Page 68)

Setting up your system
68
Or, press the Exit button to ignore any change and return to watching TV.
Auto standby mode
Auto standby mode will automatically switch off your set-top box after 3 hours of
inactivity from the remote control. A menu will display on screen asking if you want to
continue watching TV. If there is no response to this menu the set-top box will go into
standby mode. You can decide if you want this to happen or not by changing the setting.
To display the ‘Turn auto standby mode on/off ’ window, do the following.
Use the 1 Up and Down buttons to highlight ‘Auto standby mode’.
Press the 2 OK button.
The ‘Turn auto standby mode on/off’ window will be shown. See below. 3
Turn auto standby mode on/off
Next/previous
Save and return Previous menu
Return to TV
1. Turn auto standby mode on
2. Turn auto standby mode off
Back
Exit
OK
Use the 4 Up and Down buttons to highlight the option to suit your needs.
Press the 5 OK button to save the setting and return to the previous menu,
Or, press the Back button to return to the previous menu without change,
Or, press the Exit button to ignore any change and return to watching TV.
Goodmans GDB20TTS_Instruction Manual.indb 68 6/15/2010 4:26:51 PM