Grizzly H0603 - Manual (Page 12)

H0603 18V Cordless Drill and Saw -10 -
SAW OPERATIONS, CON’T
Fig 4. Blade side view. Fig 5. Handle side view.
From Figure 4:
Blade Retaining Screw: Secures blade
to saw.
Arbor Washer: Used to stabilize blade.
Blade Guard: Protects operator from
blade.
Blade Guard Handle: Used to lift blade
guard out of the way for blind cuts or
when replacing blade.
Saw Base: Supports saw through cuts.
Edge Guide: Allows cutting along the
edge of material from predetermined
point.
From Figure 5:
Hand Grip: Main handle for supporting
the saw when making a cut.
Trigger Lock Out: Safety device that
keeps the saw from accidental start-
up.
Trigger: Starts and runs saw after trigger
lock has been depressed.
Stabilizing Hand Grip: Used in conjunc-
tion with hand grip to stabilize saw
when making a cut.
4mm Allen ® Wrench: Used on blade
retaining screw to install and remove
blades.
Battery: 18 volt battery for use with this
saw.
Positive Stop Screw: Adjusts so that
base stops at 90° to blade.