Grizzly 7.2 Mini Kit H8124 - Manual (Page 8)

Model H8124 7.2V Mini Grinder Kit -6 -
SECTION 2: INTRODUCTION
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
E-Mail: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H8124 7.2V Mini Grinder Kit. This model
is part of a growing Grizzly family of fine
power tools. When used according to the
guidelines set forth in this manual, you
can expect years of trouble-free, enjoyable
operation and proof of Grizzly’s commit-
ment to customer satisfaction.
It is our pleasure to provide this manual
with the Model H8124. It was written to
encourage safety and to guide you through
general operating procedures and main-
tenance.
The specifications, details, and photo-
graphs in this manual represent the Model
H8124 as supplied when the manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
Foreword Contact Information
Machine Data
Dimensions .............................. 7 1 /
2
"L x 2"W
Housing Construction .. High Impact Plastic
Spindle & Collet Construction ............ Steel
Collet ................................................. Brass
Chuck Body Construction ... Stainless Steel
Power Required ...... 7.2VDC NiCad Battery
Battery Recharger .......... 120VAC to 9VDC
Low Speed ............................... 8,000 RPM
High Speed ............................. 16,000 RPM
LED Power Source . 7.2VDC NiCad Battery
Weight of Grinder .......................... 10
1 /
2
oz.
Total Weight With Case .....................3 lbs.