GE PB3-POS-RP - Manual (Page 47)

47
Triport Cable Modifications
In some cases, it may become necessary to modify the wiring of
the Triport cable. It is recommended that only trained
technicians modify the Triport. Modifications are limited to only
the removal of the orange or blue wire. Removing both wires or
re-attaching these wires to other solder points may disrupt
communications between the POS device, printer, and/or the
PB3.
Ref: The orange wire carries signals from the transmit signal of
the cash register.
Ref: The blue wire carries signals from the transmit signal of the
printer.
Part Number : 0900-0176
Communication Type: RS232
Connector Type: DB9M, DB9F, DB9F
Cable Required: 6 Foot DB29F to
DB9F and DB9M RS232 Cable
(Supplied). Connects PB3 to the POS
device and printer.