GE PB3-POS-RP - Manual (Page 7)

7
Introduction
This manual provides all the information necessary to properly
install this product.
** CAUTION:
Your system’s layout, camera assignment, PB3
termination, and serial device model should all be selected
before starting the installation.
PB3-POS-RP Overview
The GE PB3-POS-RP (PB3) is a specific model of ProBridge
that interfaces the DVMRe family of digital video
multiplexer/recorders to retail point-of-sale (POS) devices often
identified as electronic cash registers (ECRs) and some ATM’s.
One PB3 is required per device. Where multiple devices are
connected to a single DVMRe unit, the individual PB3’s are
interconnected through its built-in RS485 network.
A list of the supported serial device s associated with the devices
can be found in the DIP switch settings section on page 24.