Grizzly G9717 - Manual (Page 8)

G9717 6" Grinder -7-
M Mo ou un nttiin ng g tto o B Be en nc ch h N No otte es s
The grinder base has two holes directly under the
wheel shaft. These holes can be used to mount
the grinder to a workbench, table top, or other
solid surface. Since grinding does develop a lot of
force, it is best to mount the grinder solidly before
using. If you wish for the grinder to remain
portable, it can be temporarily clamped to a table.
Just make certain no part of the clamping device
interferes with the wheels or the tool rests.