GE 29578 User Manual
Page 14
1
CAUTION: To reduce risk of personal injury,
fire, or damage use only the 5-2784 power
adaptor listed in the user’s guide. This power
adaptor is intended to be correctly orientated
in a vertical or floor mount position.
5. You can stretch out the kick-stands on the bottom of the
base for a better viewing angle when placed on desktop.
6. Connect one end of the coiled handset cord to the jack on
the handset.
. Plug the other end of the coiled handset cord to the jack
on the base.
8. Make sure the DESK/WALL MOUNT tab is rotated to the
DESK position and place the handset into the cradle.
9. Adjust the RINGER VOLUME switch to the desired setting:
HI, LOW or OFF
.
T
he unit is properly installed if you pick up the handset and
hear the dial tone. If you don’t hear a dial tone recheck all
the installation steps.