GE 29578 - Manual (Page 19)

19
Amplified Audio
You may press the amplify button to temporarily boost the
volume of the handset receiver during a call. To return to
normal levels, press the button again. Volume levels will also
return to normal when handset is replaced on base after call.
The “AMPLIFY” button controls the increased volume level
and tone equalizer of the handset.
1. Press the volume
(p
or
q)
button to minimum, pick up
the handset and press the amplify button to turn on the
incoming voice amplifier . The indicator around the button
illuminates.
. Adjust the volume by pressing the volume
(p
or
q)
button.
When the amplify button is pressed , an extra level of
amplified volume is added providing up to 40dB of gain
and level control. In standard use, the amplifier turns off
whenever you hang up the telephone. If you want the
amplifier to turn on whenever you pick up the handset ,
slide the Amplify Override switch located at the back of
the unit to ON.
NOTE: AMPLIFY feature is possible in both
Handset and Speaker Mode.