GE 00023598 - Manual (Page 30)

0
Reviewing Stored Numbers
1. Press the DIAL button. The screen displays MEMORY DIAL=?.
2. Use the SKIP or REPEAT button to scroll through the memory locations.
• To dial the displayed number, press the DIAL button. The speakerphone comes on
and dials the number automatically. (To cancel, press the SPEAKERPHONE button).
• To exit stored number review, press the FLASH/EXIT button.
• To change the displayed number, press the STORE button. he screen displays EDIT
TEL. NO. See “Storing a Number in Memory.”
NOTE: Direct access memory A, B and C are displayed as Memory
11, 12 and 1 respectively on the display.
Chain Dialing from Memory
Use this feature to make calls which require a sequence of numbers, for instance if
you use a calling card for a frequently called long distance number. Basically, you dial
each part of the sequence from memory. The following example shows how you can
use chain dialing to make a call through a long distance service:
The Number For
Memory Location
Long distance access number 7
Authorization code 8
Frequently called long distance number 9
1. Pick up the handset.
2. Press the
DIAL button and then press 7.
3. When you hear the access tone, press the DIAL button and then press 8.
4. At the next access tone, press the DIAL button and then 9.