Garmin zumo 665 - Manual (Page 7)

zūmo 665 Owner’s Manual 5
Getting Started
Installing the Battery
 WarnIng
This product contains a lithium-ion battery.
To prevent damage or personal injury,
remove the unit from the vehicle when
exiting or store it out of direct sunlight.
Notice
Always keep the battery installed when the
zūmo is on.
1. Locate the lithium‑ion battery that came in
the product box.
2. Slide the release key until the battery
cover on the back of the zūmo pops up.
3. Locate the metal contacts on the end of
the lithium‑ion battery.
4. Insert the battery so that the metal
contacts on the battery align with
the metal contacts inside the battery
compartment.
5. Replace the battery cover.
Your zūmo in an Automobile
1. Plug the automotive power cable into the
power connector on the right side of the
cradle.
Cradle
Automotve
power cable
Release button
2. Remove the clear plastic from the suction
cup. Clean and dry your windshield and
the suction cup with a lint‑free cloth.
Sucton cup mount
3. Place the suction cup on the windshield.
4. Flip the lever back, toward the windshield.
5. Snap the cradle onto the suction cup arm.
6. Fit the bottom of your zūmo into the
cradle.
7. Tilt the zūmo back until it snaps into
place.
8. Plug the other end of the automotive
power cable into a power outlet in your
car.
For information on how to mount your zūmo
on a motorcycle, see page 6 .