Parts breakdown – Grizzly 2HP Magnetic G8291 User Manual
Page 2
-2-
G8291 Magnetic Switch
Thermal Relay Overload Amp
Adjustment Dial: Turn this dial
to the amperage setting speci-
fied by the motor manufacturer.
Typically, this setting is 100–
110% of the amperage load listed
on the motor data plate. Please
note that turning this dial has
no effect on increasing motor
horsepower. If turned too high,
the motor can overheat and be
damaged before the relay trips.
Trip Indicator: If this window
turns yellow, the thermal relay
has tripped.
Manual Trip Test Lever: If the
thermal relay function is in ques-
tion, run the motor and use a
wooden toothpick to slide the
yellow test lever to the left. If the
motor shuts off, the thermal relay
has tripped and is functional.
OFF Button: When pushed, the current going to the magnetic field
coil is cut, which opens the contactor and cuts power to the motor.
Manual Contactor Override
Lug: When pushed, the contactor
is manually closed for trouble-
shooting purposes only.
ON Button: When pushed,
power is sent to the magnetic
field coil, closing the contactor
and sending power to the motor.
Manual/Auto Reset Lever: In
the up position, the thermal relay
is in manual reset mode. This
means you must re-install the
outside cover and push the red
OFF button, then push the green
ON button to reset the thermal
relay. In the down position, the
thermal relay will automatically
reset when it has cooled.
Reset Button: When pushed,
the thermal relay is reset, clear-
ing the yellow trip indicator win-
dow.
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1
P4571001
SWITCH BOX
6
P4571006
CONTACTOR RETAINER
2
P4571002
SWITCH BOX COVER ASSEMBLY
7
PS55M
PHLP HD SCR M3-.5 X 10
2-1V2 P8291002-1V2 DATA LABEL HUFB-16KK V2.10.07
8
P4571008
CAPTURED GROUND SCR M4-.7 X 10
3V2
P8290003V2
CONTACTOR TECO CU-16 110V V2.10.07
9
PS10
PHLP HD SCR 10-24 X 1-1/2
4
P4571004
FIELD SWITCH TECO CNA-1
10
P4571010
LT STRAIN RELIEF PG-16
5
P8291005
OL RELAY TECO RHN-10K 22-30A
11
P4571011
RUBBER SEAL
Parts Breakdown
1
2
2-1V2
3V2
4
5
6
7
8
9
10
11
COPyRIGHT © JANUARy, 2008 By GRIzzly INdUSTRIAl, INC., REVISEd JUNE, 2010 (TS)
WARNING: NO PORTION OF THIS MANUAL MAy BE REPRODUCED IN ANy SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIzzLy INDUSTRIAL, INC.
#TS10362 PRINTEd IN TAIWAN