Gefen EXT-HDMI1.3-848CPN - Manual (Page 12)

9
How to Switch between Inputs and Outputs
The main display of the Gefen 8x8 Crosspoint Matrix for HDMI 1.3 is a sixteen-
character, two-line LCD. This display shows the current routing status
The fi rst row represents outputs A through H on the back of the unit. The second
row represents the inputs to which each output is routed. Each input can have a
value from 1 to 8.
Routing sources to a display
1 Press the Output+ button. The display will change to show a single output
(zone) and input (source).
2 Press the Input+ or Input- button to change the input (source).
3 Press the Output+ or Output- button to cycle through each of the outputs
(zones).
4 Press the Menu button to return to the routing status screen.
CONTROLLING THE MATRIX
USING THE FRONT PANEL BUTTONS