GE GEK-106465A - Manual (Page 12)

PRODUCT DESCRIPTION
GEK-106465A CIO Remote CAN Digital I/O Module 11
2.4. TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
2.4.1. INPUTS
Activation range: Programmable from 1 up to 255 Vdc in steps of 1 V
Impedance > 100 kOhm
Load for voltage supervision inputs 2 mA + V/100 kOhm
Acknowledgement time <1 m
Debounce time: 1 to 50 ms in steps of 1 ms
2.4.2. OUTPUTS
Permanent current 16 A
Closing current 60 A during 1 second
Opening current 0.3 A with L/R = 40 ms at 125 Vdc
0.25 A with L/R = 40 ms at 250 Vdc
2.4.3. CONTROL POWER SUPPLY
LO (low range)
Range: 24 to 48 Vdc (from 24 Vdc – 15% to 48 Vdc + 20%)
HI (high range)
Range: 110 to 250 Vdc (from 110 Vdc – 15% to 250 Vdc + 20%)
110 to 240 Vac (from 110 Vac – 15% to 240 Vac + 20%)
Consumption: 5 W typical
0.25 W more per each activated output.
Interruptions: Typical 100 ms, without unit reset.
2.4.4. CAN BUS
Baudrate: 125 kbits per second
Media: Glass fiber optic multimode with ST connectors.
Maximum recommended length 1Km
3 wire cable connection
Maximum recommended length 500m
2.4.5. ENVIRONMENTAL CHARACTERISTICS
Operation temperature: - 10
°C to + 60°C
Storage temperature: - 40
°C to + 80°C
Humidity: 95% without condensing.