Motorola digital cellular phone - Manual (Page 80)

80
3. Press to select the system mode setting you
want.
4. Press º to exit, or scroll to other features.
Reviewing Feature Settings
Use this feature to review the changes you’ve made to
feature settings.
Keep in Mind: While scrolling through Feature Review, you
can only review settings. You cannot change them.
1. Follow steps 1-2-3 above to select Feature Review .
The display message indicates whether the phone is
accessing a Digital, Analog, or Control Channel:
Note: The icon illuminates when on a digital control
channel.
2. Press , or press « or » to scroll through
features you changed from their default settings.
If all of the features are set to the factory standard
settings, the display will show
Standard Setting .
3. Press º to exit the menu.
DX - xxxx
D=Digital Traffic Channel
Digital Slot Number
Digital Channel Number
A=Analog Voice Channel
Analog Channel Number
C xxxx
C=Control Channel
Control Channel Number
or
or
A xxxx
or
TDMA.book Page 80 Thursday, October 29, 1998 9:52 AM