Motorola Canopy FSK and OFDM radios PTP 100 (FSK) - Manual (Page 10)

Release 11.0 Release Notes and User Guide Supplement
Issue 1, March 2011 Page 10
3 Upgrading to Release 11.0
Upgrade first to R11.0 then enable RADIUS settings if desired (or not). In most cases operators
will want to upgrade to R11.0, then trial a friendly sector with RADIUS, then deploy RADIUS to
their entire network.
R11.0 does not require using RADIUS. If upgrading a network from an old release, upgrading to
R11.0 is recommended, even if not using RADIUS, so as to take advantage of features and fixes
through R11.0.
Use version 3.20.16 of the Network Updater Tool (CNUT) to upgrade to Release 11.0. Version
3.20.16 supports distribution of certificates to SMs.
CNUT and its release notes can be downloaded from the Motorola wireless broadband support
web site:
http://motorola.wirelessbroadbandsupport.com/software/
Modules in operating sectors should be on Release 9.5 or 10.5 before upgrading to avoid
upgrade issues.
3.1 OBTAINING CNUT UPGRADE PACKAGES
To download the Canopy software to your computer, perform the following steps:
1. Go to http://motorola.wirelessbroadbandsupport.com/software .
2. Follow the directions on that page to access the software download page.
3. On the software download page, select the appropriate package or packages. Options
include
 CANOPY11BUILDOFFICIAL_DES.pkg3
 CANOPY11BUILDOFFICIAL_AES.pkg3
 CANOPY11BUILDOFFICIAL_OFDM_DES.pkg3
 CANOPY11BUILDOFFICIAL_OFDM_AES.pkg3
4. Click Accept User Agreement and Request Download Links.
RESULT: You will receive an email with a link or links to the software.
5. In the email sent to you, click on the desired link or links.
RESULT: The appropriate
.pkg3 package or packages will download to your computer.
For additional information on using CNUT, see the CNUT help file or click on the Help menu in
the CNUT application.
3.2 NETWORK MANAGEMENT
Use One Point Wireless Manager to manage Motorola PMP and PTP networks, including
managing the RADIUS features. For additional information, see
http://motorola.wirelessbroadbandsupport.com/support/opws/software/
3.3 PMP 430 – OPTIONS FOR 5, 10, AND 20 MHZ CHANNEL SIZE
PMP 430 APs and SMs ship with software with a 10-MHz channel size. This can be changed to 5
or 20 MHz using CNUT. For an operating sector, use CNUT to change the channel size of the
SMs first, then the AP. For SMs being deployed into an operating sector, use CNUT to set the
channel size before deploying the SMs.
To set the channel size, use the Update > Configure > HPAP Channel Bandwidth menu on
CNUT. See the latest CNUT release notes for additional information.