Motorola Canopy FSK and OFDM radios PTP 100 (FSK) - Manual (Page 23)

Release 11.0 Release Notes and User Guide Supplement
Issue 1, March 2011 Page 23
Note, remote access control is enabled only after the SM registers to an AP that has
Authentication Mode set to RADIUS AAA. Local access control will always be used before
registration and will be used after registration if the AP is not configured for RADIUS.
Figure 6: SM's Account > User Authentication tab
5.6.3 Access Tracking
To track logon and logoff times on individual radios by technicians, installers, and administrators,
on the AP or SM’s Account > User Authentication and Accounting tab under Accounting (Access
Tracking) choose Enabled.
Device Access Tracking is enabled separately from User Authentication Mode. A given AP or
SM can be configured for both, either, or neither.
Device Access Tracking does not track and report specific configuration actions performed on
radios or pull statistics such as bit counts from the radios. Such functions require an Element
Management System (EMS) such as the Motorola One Point Wireless Manager.
5.7 CONFIGURING YOUR RADIUS SERVER FOR DEVICE ACCESS
TRACKING
The VSA needed for device access tracking and the associated values are shown in Table 2 on
page 19 .
5.8 PROCEDURES
5.8.1 Configuring a basic system
For a basic system:
On the SM’s Configuration -->Security tab:
o Lock AAA: Disabled
o Phase 1: EAPTTLS (can't be changed)