Pip function only for the pip tv sets – Metz Astral MF PIP 72TF81 User Manual
Page 46
46
y
Euro 1/2/3-socket:
Video recorder
Camcorder
Photo-CD etc.
Front sockets:
Camcorder
Video recorder
PIP picture
Terrestrial or
cable TV
Terrestrial or cable TV
External devices via
Euro sockets 1/2/3
External devices
via front sockets
External devices via Euro
sockets 1/2/3
External devices via front
sockets
TV picture:
The PIP (picture-in-picture) function permits a second, smaller picture to be superimposed on the main picture on the screen. Both of
these may be moving pictures.
The small picture may come from another terrestrial or satellite programme position or from a video cassette recorder or a running cam-
corder connected to the TV set. The picture below shows the various possibilities.
The PIP function can thus, for example, be used to monitor a child’s bedroom with a camcorder while watching a TV programme.
Connection of the various external devices
is described in Section 15. „Connecting
peripheral equipment“ of the Operating
Instructions for your TV set.
swap
Possible PIP picture contents
12. PIP function
only for the PIP TV sets
Overview
Terrestrial TV
reception (house
aerial) or
cable TV reception
Aerial splitter
75 Ohm
75 Ohm
Note for dealers:
In order to permit operation of both TZ
modules from a single aerial cable, we
recommend the use of a passive aerial
splitter (such as Polytron 012 AS or a
similar device).
A SAT receiver can be installed only instead of one or both terrestrial receivers.