Presetting tv stations, Ok tv, Colour and transmission standards – Metz Astral MF PIP 72TF81 User Manual
Page 9: Tv station table
3. Presetting TV stations
In the sub-menu Standard, you can select the colour and/or the transmission standard. The TV set normally recognises the colour stan-
dards (PAL, SECAM, NTSC) automatically, but the transmission standard must always be set manually. The multi-standard upgrade kit is
required for the additional transmission standards L, I, D/K and NTSC 4.43. In exceptional cases, the colour standard may not be recogni-
sed; if this happens, you must set it as described in Step 1, below.
Example:
Transmission standard I is to be set. This must be done manually.
Press this key on the remote
control....
The screen displays
Explanation
Programme
Std
Pict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
6 9 6 + 0 3 K - G B
LOGIC
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
TV station table
—
—
—
—
Sound
—
—
—
—
Automatic
PAL
SECAM
NTSC
Standards
?
MENU
return
Help
TV
picture
AV
Programme
Std
Pict.
▲▼
<< weitere Einstellungen
Logo, Frequ., Signal
6 9 6 + 0 3 L - G B
LOGIC
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
—
—
—
—
Sound
—
—
—
—
Standard L SECAM
Standard I PAL
Standard D/K PAL
PAL 60Hz - 4,43 MHz
NTSCL 60Hz - 4,43 MHz
store ?
OK
TV station table
?
MENU
return
Help
TV
picture
AV
The automatic function of the submenu „Standard“ is
preset in the factory.
The settings PAL, SECAM and NTSC need to be selected
manually only if the automatic detection function does
not recognize the colour standard correctly.
☞
The transmission standard must always be set
manually.
The various standards can be selected with the related
coloured keys.
In this example, the transmission standard I PAL is
selected.
The multi-standard upgrade kit 031 NC 1030 (optional
extra) is required for the reception of the transmission
standards L, I, D/K and NTSC 3,58.
9
Colour and transmission
standards
OK
TV
1. Call submenu „Standard“
2. Select the transmission
standard or colour standard
(e.g. standard I)
3. Store the settings and
return to the TV picture
red
red
yellow
white
white