Setting up a usb driver in windows xp – Motorola SB4220 User Manual
Page 26
21
SURFboard Cable Modem SB4220 Series User Guide
X
Exit
License
Setting Up a USB Driver in Windows XP
Be sure the SURFboard Cable Modem CD-ROM is inserted into the CD-ROM drive
before you plug in the USB cable. A few seconds after you complete the USB
connection, the Found New Hardware Wizard window is displayed.
1
Be sure “Install the software automatically” is selected.
2
Click Next. Windows automatically searches for the correct USB drivers and installs
them. If the installation is successful, the window at bottom left is displayed.
3
Click Finish to complete the installation. Otherwise, be sure the SURFboard Cable
Modem CD-ROM is correctly inserted in your CD-ROM drive.
When you finish setting up the USB driver, you can continue with
.
Although your SURFboard cable modem model number may
be different than in the images in this guide, the procedure is
the same.