C yc l e – Margaritaville DM3000 User Manual

Page 9

Advertising
background image

-7-

A dd i ng Dr i n k I ng r e d i e n t s t o

t h e B l e n d i ng Ja r s

7.

Lift and remove the three Blending Jars

NOTE: AT THE CENTER BLENDING STATION,

THE ICE CHUTE IS SPRING-LOADED
AND WILL RETRACT WHEN REMOVING THE
BLENDING JAR.

8.

Remove the lid of each Blending Jar.

9.

Pull out the Recipe Drawer to refer to

drink recipes.

10.

Add ingredients to each Blending Jar

based on the type of drinks you will be making at
each Blending Station to be
used for this cycle.

NOTE: DO NOT OVERFILL INGREDIENTS AS IT CAN

CAUSE OVERFLOW

11.

Turn the main On/Off Switch (located at the right back side of the unit) to the

ON position.
The main Power Indicator Light will illuminate and fl ashes.

12.

Replace each Blending Jar Lid, and return each Blending Jar to

the respective Blending Station.

Each jar can only be positioned in three

orientations.

NOTE: FOR THE MIDDLE STATION, PUSH UP ON THE RETRACTING ICE CHUTE

WITH THE BLENDING JAR TO SET IT INTO PLACE.

13.

For each Blending Station you are using for this cycle, rotate the Drink

Selection switch to match the type of drink you have prepared. The White LED
Light will illuminate for each active Blending Station.

NOTE: FOR ANY BLENDING STATIONS YOU ARE NOT USING IN THIS CYCLE,

LEAVE THE ROTARY DRINK SELECTION SWITCH AT THE “OFF” SETTING
(OR LEAVE JAR OFF THE BASE). THE BLENDING JAR DOES NOT NEED TO

NOTE: THE UNIT WILL AUTOMATICALLY DETECT HOW MANY BLENDING

STATIONS ARE IN USE FOR EACH SHAVE-N-BLEND

CYCLE AND

WILL ROTATE ONLY TO THE BLENDING JARS THAT ARE ACTIVE.

Sta rt i ng t h e Au t om at e d

S h av e -n-B l e n d

C yc l e

14.

Start the automatic Shave-n-Blend

cycle by depressing the START button

in front of the center Blending Station for at least half a second.

NOTE: A DELAY WAS ADDED TO RESTRICT ACCIDENTAL START.

Advertising