Morel SOUNDSPOT ST-95 - Manual (Page 14)

Speaker Placement
In designing the subwoofer, we have made every effort to
make it unobtrusive in the environment, by its slim cabinet
design. Unlike surround or stereo speakers, which must be
placed to project directly to the listeners' ears, the subwoofer
moves all the air in the room and can be placed wherever
convenient. The subwoofer can even be hidden behind the
TV stand or next to any furniture.
Thank you for choosing Morel's SoundSub
TM
Subwoofer.
The SoundSub
TM
RS-91A, RS10A and IS-9A are active
subwoofers (IS-9A is built of two 9" woofers), driven by a high-
quality amplifier that is AC-3 compatible. Designed to augment
the SoundSpot
TM
satellite speakers in the low bass frequency
range, the SoundSub
TM
will enhance any home theater system
with a well-controlled, accurate bass.
Connecting The SoundSub
TM
1.1 Main Power switch
The new amplifier will have its main breaker switch at the bottom
left corner, next to the power cord inlet. It consists of an ON/OFF
switch.
The main power switch has to be in the ON position in-order for
the unit to become operational.
1.2 Auto power switch
In the upper left there is a power switch. If AUTO position is
selected, the sub will become operational as soon as the
SoundSub
TM
will receive an audio signal. It will be turned off
several minutes after the audio signal is switched off.
At the ON position the SoundSub
TM
will become operational
indefinitely, or until the AUTO position is selected.