MITSUBISHI ELECTRIC LT-52244 - Manual (Page 28)

28 TV Operation and Features
4
Choosing a Viewing Source
Input Selection menu
Choose a viewing source from the Input Selection
menu. The current TV input appears as a full-color
icon in this menu.
1. Press INPUT to display the Input Selection menu.
Note: If there are only two inputs to the TV, INPUT
switches between them without displaying the
menu. The menu will display, however, if one of
the two inputs is a CableCARD.
2. Highlight an input icon using .
3. Press
ENTER to switch to the input and close the
menu.
More About the Input Selection Menu
• To assign meaningful names to the icons, see the
Inputs > Name menu in chapter 5, “TV Menu Set-
tings.”
• To rearrange the icons, see the Inputs > Order
menu in chapter 5, “TV Menu Settings.”
Sleep Timer
The Sleep Timer turns the TV off after the length of time
you set.
Setting the Sleep Timer
1. Press
SLEEP on the remote control. An on-screen
status display will appear and show the number of
minutes before automatic shut-off.
2. Press SLEEP additional times to increase the time in
30-minute increments up to the maximum of 120
minutes.
3. Press EXIT or wait five seconds without pressing any
keys for the message to disappear.
4. Press SLEEP to view the time remaining before the
sleep timer turns off the TV.
Cancelling the Sleep Timer
1. Press
SLEEP to display the on-screen message.
2. Press SLEEP repeatedly until OFF is displayed.
Note: After five seconds of inactivity, the message box
will disappear.
TV Tips
Turning the TV On or Off
To turn the TV on or off, point the remote control at the
front of the TV and press the
POWER key. Alternatively,
press the POWER button on the side panel of the TV.
Controlling Sound Volume
Press
VOL / to adjust the sound level. See also
“Controlling A/V Receiver Sound Volume” in chapter 2,
“TV Setup.”
Changing Channels (antenna sources)
To change channels:
• Enter the channel number using the number keys
on the remote control and press ENTER. For a two-
part digital channel, such as 3-1, press 3 — CANCEL 1 to
enter a dash (separator).
• Press CH/PAGE / to change channels one
channel at a time.
• Press and hold CH/PAGE / to scan quickly
through channels.
• Press QV (QuickView) to switch back to the previ-
ously tuned channel.
• Press GUIDE to display ChannelView or TV Guide
Daily channel listings, then highlight a channel and
press
ENTER.
• Use the Fav (Favorites) feature to set up lists of
favorite channels and tune to them with the FAV key.
See “Setup Menu” in chapter 5.
NOTE: Perform channel memorization to make finding
channels easier. See the Setup > Scan menu.