MITSUBISHI ELECTRIC LT-52244 - Manual (Page 29)

4. TV Operation and Features 29
1. POWER: Turns TV power on and off.
2. Slide Switch: Selects the A/V device to be oper-
ated by the remote control. Set the slide switch
to
TV for operation of the TV and NetCommand-
controlled devices. Control of additional devices
requires programing (see Appendix D, “Program-
ming the Remote Control.”
3. SLEEP: Sets the TV to turn off within 2 hours.
4. Digits/Letters: Press digits for channel numbers,
then press ENTER for faster tuning. Use numbers and
the — CANCEL key to enter digital sub-channel numbers.
Use also for entering letters or names in menus.
To select letters when naming channels, repeatedly
press the associated number key. Press ENTER to set
the letter. Special characters are available with the 1
key (!, &, blank space) and 0 key (/, *, -).
5. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital
channel numbers, adds a separator between main
and sub-channel numbers. Clears Fav and some
menu entries.
6. QV (QuickView™): Switches between the current
channel and the last channel viewed on ANT 1 or
ANT 2.
7. MUTE: Turns TV sound on and off.
8. SPLIT: Not used with this model.
9. FAV (Favorites): Scans through memorized lists of
favorite channels. See “Setup Menu” in chapter 5,
“TV Menu Settings,” for more information.
10. VOL / (Volume Up/Down): Changes sound
level.
11. CH/PAGE / (Channel or Page Up/Down):
Scans up or down through memorized channels.
Pages up and down through screens when used with
the TV Guide Daily system or ChannelView
.
12. FORMAT: Changes the shape and size of the TV
picture.
13. LIST: Works like the LIST key for a cable box or satellite
receiver when “learned” for NetCommand or when
the remote has been programmed for the device.
14. INPUT: Displays the Input Selection menu from
which you can select an input source to view, such
as an antenna input (
ANT 1/2) or a connected
device.
15. (Adjust Up/Down/Left/Right): Navigate
menus and change settings.
16. ENTER: Selects a channel number or menu item.
17. GUIDE: Displays or removes ChannelView™ channel
listing for ANT 1 and ANT 2, or TV Guide Daily list-
ings if TV Guide Daily is enabled. Displays DVD
disc or top menu for a NetCommand-controlled
DVD player.
Remote Control
18. INFO: Displays an on-screen summary of the current
device in use and any broadcast information available,
including current V-Chip ratings information. See
chapter 4, “TV Operation and Features,” for details.
19. AUDIO: Selects individual audio settings to adjust.
20. VIDEO: Selects individual video settings to adjust.
21. MENU: Displays the main TV menu. When a sub-
menu is open, backs up one menu level.
22. EXIT: Closes TV on-screen menus/displays.
23
29
11
2
3
4
5
7
8
10
25 24
27 28
26
17
18
9
12
13
14
15
1
6
16
19
20
22
21