Maintenance and specifications – Mazda 2007 B2300 Truck User Manual

Page 269

Advertising
background image

JOBNAME:

No

Job

Name

PAGE:

269

SESS:

1
OUTPUT:

Thu

Aug

3

11:45:36

2006

/ford_pdm/ford/own2002/mbs/og

Item

Application

Mazda part name or

equivalent

Capacity

Fuel tank

Regular cab

(Short wheel

base)

17 gallons (64.4L)

Cab Plus 4

19.5 gallons (73.8L)

1

Brake fluid will drop slowly as the brakes wear and will rise when brake components are replaced.

Fluid levels below the MAX line that do not trigger the brake warning light are within the normal
operating range, there is no need to add fluid. If the levels are outside the normal operating range,
the performance of your brake system could be compromised, seek service from your authorized
dealer immediately.

2

Add the coolant type originally equipped in your vehicle. Do not mix different colors or types of

coolant. Do not use Mazda Extended Life Engine Coolant (orange in color). Refer to Adding
engine coolant, in this chapter.

3

Service refill capacity is determined by filling the transmission to the bottom of the filler hole with

the vehicle on a level surface.

4

Automatic transmissions that require MERCON

௡ V should only use MERCON௡ V fluid or fluid that

is specified dual usage MERCON

௡/ MERCON௡ V. Refer to scheduled maintenance to determine

the correct service interval. Use of any fluid other than the recommended fluid may cause
transmission damage.

5

Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and

if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set
by the indication on the dipstick’s normal operating range.

6

Traction-Lok axles use 4.75–5.0 pints (2.2–2.4L) of rear axle lubricant. Add 4 oz. (118 ml) of

Additive Friction Modifier meeting Mazda specifications for complete refill of Traction-Lok axles.
Service refill capacities are determined by filling the rear axle 1/4 inch to 9/16 inch (6 mm to 14
mm) below the bottom of the filler hole.

If submerged in water, the rear axle lubricant should be changed.

REVIEW

COPY

——

2007

B-Series

(mbs)

,

Owners

Guide

(post-2002-fmt)

(own2002)

,

Market:

USA

(fus)

P

AGE:

269

OP:

root

EDIT

SESSION:

1
DA
TE:

AUG

3
2006

at

1

1:45

JOB:

@ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_mbs/DIV_og

Maintenance

and

Specifications

269

Advertising