Overpressure security valve - hypalon models, Lifting the boat, Operation – Mercury Marine Ocean Runner 898393001 User Manual

Page 30: Overpressure security valve ‑ hypalon models

Advertising
background image

OPERATION

26

NOTE: Always be aware of the air pressure in the air chambers.

The air volume inside the air chambers will expand as the internal

air temperature rises, this will cause the air pressure to fluctuate

depending on water temperature and weather conditions. A boat

that is correctly inflated, may experience a drop in air pressure and

require additional air when temperatures get cooler or it may

become over inflated when in direct sun light or as the

temperatures get hotter. This will require the air to be deflated until

the recommended air pressure is reached.

Overpressure Security Valve ‑ Hypalon Models

NOTE: This feature is Included on Hypalon fabric models.

If the air pressure exceeds the maximum limit, the red cap will

loosen or pop off the overpressure valve. Air will escape until the

air pressure returns to the recommended limit. Replace the red cap

on the overpressure valve.

NOTE: Keep items clear of the overpressure valve that could

prevent the red cap from popping off the valve.

a

24745

a -

Red cap

Lifting the Boat

When using a hoist to lift the boat, attach the hoist to the front and

rear lifting rings attached to the hull.

Advertising