Mercury Marine Ocean Runner 898393001 - Manual (Page 35)

MAINTENANCE
31
Cleaning Procedure
FABRIC SURFACES
Inflate the air chambers. Clean the fabric with a mild soap and fresh
water solution. Rinse with fresh water and dry thoroughly.
IMPORTANT: Do not use a vinyl preservative on the air chamber
fabric. Chemicals in the preservatives may dry out the fabric.
BOAT HULL
Remove the plug to open the self bailer. Use a hose to wash out
any debris from the interior. Wash the interior with soap and water.
Clean any debris from the self bailer. Rinse with fresh water and
dry thoroughly.
Deflation
IMPORTANT: Do not deflate one air chamber at a time. When
deflating, maintain a balanced air pressure between air chambers
to prevent stress or potential damage to the inside diaphragms that
separate the air chambers.
Unscrew the valve caps, turn a quarter turn counterclockwise.
Push in the valve stems to release the air pressure evenly on all
chambers. Push in the valve stem and turn the stem a quarter turn
clockwise to lock the valve in the open position.
Air Chamber Repair ‑ Hypalon Fabric
!
WARNING
Avoid serious injury or death from a fire, explosion or poisoning.
The glues and solvents used for repairing inflatables are toxic
and highly flammable. As a safety precaution, always work
outdoors or in an area that is well‑ventilated, and away from any
open flames, sparks, or appliances equipped with pilot lights.
Breathing the vapors or exposure to the skin may be hazardous
to your health. Avoid breathing the vapors and contact with skin
and eyes by wearing a carbon filter respirator and protective gear
over all exposed areas of the body.