MITSUBISHI ELECTRIC LVP-X300U - Manual (Page 20)

EN – 20
Advanced features for presentation
Expand
By pressing the EXPAND button on the remote con-
trol, you can view the detailed image of the picture.
You can also view the screen diplaying the picture as
its original size (real screen display) by pressing the
button again.
Using the Expand mode
1. Press the EXPAND button.
• You can magnify different areas of the active pic-
ture by pressing the
{, }, $ or % button.
• You can change the magnification of the zoomed area
by pressing the + or - button.
2. Press the EXPAND button on the remote control
again.
The real screen display will appear on the screen.
3. Press the COMPUTER or VIDEO button.
The normal screen display will appear on the screen.
• Display enlargement does not work with
video input or S-video input.
• In EXPAND mode or REAL mode, pressing the
COMPUTER or VIDEO button will switch to the
normal screen display .
The normal screen display will appear on the screen.
• In EXPAND mode, you cannot adjust the zoom/fo-
cus and the volume.
• When displaying the images through VIDEO IN
terminal or the video images through COM-
PUTER IN terminal, expanded image display is
not available. Only real screen display is avail-
able.
• During expand mode, the PinP mode is not avail-
able.
REAL screen display
• During REAL mode, Press the
$ or % buttons
for fine adjustment. the { and } buttons are
not working at this time.
• The expanding rate cannot be changed by
pressing either the + or - button. They are
working for volume adjustment.
Still
How to stop the picture temporarily (still picture).
1. Press the STILL button on the remote control.
The picture will stop temporary.
To resume picture activity.
2. Press the STILL button on the remote control
again.
PinP (Picture in Picture)
One of the special features of this unit is the picture-
in-picture (PinP) mode. PinP allows you to view differ-
ent sources at the same time.
1. Press the PinP button on the remote control.
The sub image will appear.
• Pressing the PinP button repeatedly will select
on and off.
• You can change the position of the sub image by
pressing the
{, }, $ or % button.
• You can change the size of the sub image by
pressing the + or - button.
2. If necessary, select the desired external input source
of the sub image by using the VIDEO button.
• You can change the external input source of the
main image by using the COMPUTER button.
3. Press the PinP button on the remote control again.
The sub image will be disappeared.
• During PinP mode, the audio selected in PinP
AUDIO of the AUDIO menu is outputted.
• During PinP mode, you cannot adjust the zoom/focus
and the volume.
• Adjusting contrast, brightness, tint or color isn't
available during PinP mode.
• When connecting DVD player or MUSE decoder
etc. to COMPUTER IN terminal, PinP are not
available.
• During PinP mode, the expand mode is not avail-
able.
Main image
(From COMPUTER IN)
Sub image
(From VIDEO IN)