Maintenance, En – 23, Cleaning the air-filter – MITSUBISHI ELECTRIC LVP-X300U User Manual

Page 23: Cleaning the projector and the ventilation slots, Cleaning the lens

Advertising
background image

EN – 23

ENGLISH

Maintenance

Caution:
Be sure to turn off the projector and unplug the power
cord from the wall outlet before you perform any main-
tenance on the projector.

Cleaning the air-filter

This projector has two air-filters, for bottom air-outlet
slots and for front air outlet slots. Clean the air-filter
frequently. If the filter or ventilation slots become clogged
with dirt or dust, the temperature inside the projector
may rise and shut off the power (the TEMP indicator
starts to blink red).

For bottom air outlet slots
1. To remove the filter cover, press the ridged

area gently, push the cover in the direction
of the arrow and lift.

2. Remove the air-filter from

the filter cover.

3. Wash the air-filter.

• Use water or a mild

detergent diluted with
water to clean the filter.
Rinse the filter thoroughly and let it dry
completely.

4. Attach the filter to the cover.

5. Reinstall the filter cover.

For front air outlet slots
1. To remove the filter cover, press the

two ridged area gently and pull the cover.

2. Remove the dust from the

air-filter by using a vacuum
cleaner.
• Do not wash the air-

filter.

3. Reinstall the filter cover.

Important:
• If the filter is damaged or becomes extremely

dirty, contact your dealer for replacement.

• The power will not turn on if the air-filter cover is

improperly installed.

Caution:
Be sure to use the projector with an air-filter. If not,
dust may get inside the projector, causing a fire or a
breakdown.

Cleaning the projector and the ventilation
slots

Use a soft cloth to clean the projector and the ventila-
tion slots. When the slots become dirty, wipe them with
a soft cloth dampened with a diluted mild detergent,
and then wipe them with a dry cloth.
To protect the surface of the projector from fading or
deteriorating:
• Do not spray insecticide on or inside the projector.

• Do not use benzine or thinner to clean it.

• Do not let rubber or plastic materials come into

contact with the projector.

Cleaning the lens

Use a standard lens-cleaning brush or a piece of lens
tissue dampened with lens cleaning fluid. The lens sur-
face is fragile. Use only recommended, nonabrasive
lens-cleaning materials. Do not touch the lens with your
fingers.

Filter

Filter cover

Filter cover
(For front air outlet slots)

Filter cover
(For bottom air
outlet slots)

Air-filter

Filter cover

Advertising