Matrox Electronic Systems FastNIC 10/100 10574-MT-0102 - Manual (Page 6)

4. Insert the driver diskette into the PC’s floppy drive. Specify the
directory a:\winnt and click OK:
5. By default, the Fast NIC is configured for AutoDetect mode. However,
you can use the Properties window to force the speed and duplex
settings of the card:
Novell NetWare (DOS Client)
To install the driver support software for a Novell NetWare DOS client,
perform the following steps:
1. Copy the contents of the a:\novell directory to the c:\nwclient directory
on the PC:
copy a:\netware\client\dos\*.* c:\nwclient
NOTE: If necessary, substitute the appropriate directory name if
c:\nwclient is not the name of the directory containing the NetWare
client software.
2. Use the DOS Edit command to create a batch file called
startnet.bat that contains the following commands:
c:\nwclient\lsl
c:\nwclient\l100
c:\nwclient\ipxodi
c:\nwclient\vlm