Master Lock F-64TPG - Manual (Page 17)

17
T O U C H P AD M E N U M O D E
The Touchpad can provide access to a wide assortment of utility functions, each displayed on the Touchpad LCD window in a
prompting “YES/NO” format.
1 To enter Touchpad Menu Mode, press MENU.
2 To skip a function, press NO.
3 To select and execute a function, answer YES.
• Press RESET to return to normal Touchpad operation. The Touchpad will automatically return to its normal operating mode if
no activity is detected for longer than one minute.
• When the last function in the menu appears, press MENU again to repeat the menu.
Note: All functions in the menu appear if the Master I-FOB is inserted into the Touchpad before pressing MENU; if a User I-FOB is
inserted or if an I-FOB is NOT inserted, only a limited number of functions will be displayed. Limited functions are noted below.
ENTER BYPASS MENU - The Bypass Menu provides a list of items to bypass. The
first Menu item is "BYPASS ALL OPEN ZONES" allows you to bypass all open
perimeter zones (excluding the primary exit/entry door). The Bypass icon will ap-
pear for each bypassed zone listed. The next Bypass Menu selection "DISPLAY
ZN BYPASSED " appears only if zones are bypassed and allows you to display
those bypassed zones. The next Bypass Menu selection "DISPLAY ZN DIREC-
TORY" allows you to display a listing of all zones in the Area. Press YES and NO
to scroll through each of these lists.
ACTIVATE CHIME - The Chime Mode will sound a tone at the Touchpad when the
programmed zone is faulted while disarmed. To deactivate the Chime Mode, re-
enter Touchpad Menu Mode and when “DEACTIVATE CHIME“ is displayed, press
YES. Note: The Chime Mode is disabled while armed. Chime is disabled for Pro-
tected zones while armed, Never Armed zones (such as a driveway sensor) will
ENTER BYPASS
MENU Y/N
ACTIVATE
CHIME Y/N
F-64TPG_OI320A.03_USER_2...
page 17
Friday, September 15, 2006 11:40
Composite