Madge Networks 1200 - Manual (Page 46)

cannot properly communicate with the Access Point
to test the device, and will report failure.
Due to the nature of wireless connection, the test
may report failure with
″No LinkTest response
received ″ error message in the log, even if the
device is working properly. When the test failed with
this error, please repeat the test for a few times.
The device may be working properly unless the
same error persists.
Related service information
PC-Doctor can detect the following system information:
Hardware Info:
v System Configuration
v Memory Contents
v Physical Disk Drive
v Logical Disk Drive
v VGA Information
v IDE Drive Information
v PCI Information
v PNPISA Information
v SMBIOS Information
v FRU Information
v VESA LCD Information
v SM712 General Information
Utility:
v Run External Tests
v Surface Scan Hard Disk
v Benchmark System
v DOS Shell
v Tech Support Form
v Battery Rundown
v View Test Log
v Print Log
v Save Log
v Full Erase Hard Drive
v Quick Erase Hard Drive
Power systems checkout
To verify the symptom of the power problem on the
computer, do the following:
1. Power off the computer.
36 ThinkPad i Series 1200/1300 HMM