Memorex MPH4385 - Manual (Page 13)

E–11
CALLER ID OPERATION
Make sure that the Caller ID service is
turned on by your phone company.
When you receive a call, the display will
show the name, number, time and date
of the caller.
TALMO HOLLY
AM
CALL# NEW
1
If a call is received from an area which
does not provide caller ID service, the
display will show, “UNAVAILABLE”.
AM
CALL# NEW
UNAVA I LABLE
2
If a call is received from a caller that
has blocked his/her information, the
display will show, “BLOCKED CALL”.
AM
CALL# NEW
BLOCKED CALL
3
To answer the call, press the
SPEAKERPHONE button, or pick up
the handset. The timer will appear and
then start counting after 15 seconds.
4
RECEIVING A CALL
The display will indicate the total calls
and the new calls. When you want to
check the calls received, press the UP
or DOWN buttons.
The NEW CALL indicator will blink
when the caller ID registered new calls.
TOTAL 03 03 NEW
AM
5
NOTES:
•
When you receive a call, the unit will automatically set the time and date.
• The caller ID memory can store up to 80 name/numbers.
MPH-4385 (REVISED2/01).O/M.QXD 6/20/01 7:41 AM Page 12