Motorola ME4050 - Manual (Page 10)

17
U
si
n
g
t
h
e
Te
le
p
h
o
n
e
18
U
si
n
g
t
h
e
Te
le
p
h
o
n
e
Note: If an external call is received during an internal
call, short acoustic signals are issued (call waiting).
1.
2.
3. Press the key.
Press the number of the required handset (1..4).Carry out the conversation.
Press the key to end the call.
Making External Calls
There are two ways to dial a number, namely direct dialing or on-hook dialing.
Press the key and wait for the dialing tone.
Dial the telephone number and complete the call.
Press the key to end the call.
Direct dialing
On-hook dialing
Dial the telephone number.
Delete any incorrect entries by pressing the
key.
Press the key. The number entered is dialed and a
connection established. Carry out the conversation.
Press the key to end the call.
1.
2.
3.
1.
2.
3.
4.
If more than one handset is registered on the base station,
internal calls can be made free of charge.
Making Internal Calls
Press the key repeatedly until menu item LANGUAGE appears.
Press the
key to confirm the item.
Press or as often as necessary to select the required language.
Press the
key to confirm the selection.
Ten different languages are available for selection for each handset.
Proceed as follows to select a language:
Selecting the Language
1.
2.
3.
4.
Note: The following languages are available: English, German, Italian, French, Spanish,
Hungarian, Dutch, Polish, Swedish, Turkish.
Switching the Handset On/Off
When the handset is placed on the base station or charging unit, it switches on
automatically and starts to charge up. Allow the batteries to be charged for 14 hours
without interruption the first time they are charged. The telephone does not have an
On/Off switch.