Motorola MOTONAV TN500 - Manual (Page 18)

16 let’s go
Google™ local search
You can use Google to search for an address or point of
interest. Your device must be connected to your mobile
phone via Bluetooth® to use this feature.
1 Tap Enter Destination.
2 Enter what you want to search for.
3 Tap Google > Search.
send addresses from the Web
MotoExtras also lets you send addresses from the internet
to your device so you can navigate to them easily without
entering the address. To use this feature, make sure your
mobile phone is connected to your device via Bluetooth.
1 On your PC or mobile phone browser, navigate to
www.google.com/maps.
2 Type what you are looking for and the location in the
search field. (Example: “pizza, Gilbert, AZ”).
3 After you find what you’re looking for, click “Send.”
4 Click “GPS,” then select “Motorola” in the Brand
pull-down box.
5 From the Include drop-down menu, select the address
you want and click “Send”.
6 Enter your MOTONAV serial number in the “S/N” field.
The serial number is on the label on the bottom of the
device.
7 Check “Use as default” to save your serial number for
next time.
8 Click “Send.”
9 On your device, tap the map > Main Menu > Favorites >
Google Locations > Update. Any locations saved at the Google
site will be sent to your device.
use VoiceSearch powered by
Bing™
Use the voice prompted search service to find just about
anything. This service searches for you, then sends your
results to your phone in a text message.
To achieve best results, wait until the Bing prompts finish
before you speak.