MACKIE HDR 24/96 - Manual (Page 84)

HD24/96 Technical Reference 84
Appendix C – Networking (FTP) Setup
The HDR 24/96 comes to you with a handy 10/100mb local area network (LAN) card built in.
The main purpose of networking the HDR 24/96 using Ethernet is to share or back up project
files to a computer, network server/router or other device with an Ethernet connection and
common protocol.
The topic of computer networking can get very complex and we can’t give you a complete
course here. This appendix will cover the basics for configuring a small, directly connected
peer-to-peer network consisting only of one HDR24/96 and one computer, with some side notes
about integrating with a small local area network. If you’re connecting to a larger network, for
instance in a corporate workgroup environment, you probably have a network administrator who
can integrate your HDR24/96 using the information presented here.
VERY IMPORTANT: You really CAN connect your HDR24/96 to the Internet. This means that
others who discover your recorder’s address can access, add, and even delete files on your
recorder. Hackers have programs that search systems on The Net for audio files in hopes of
finding a pre-release copy of the Next Big Hit. You may not want that much free publicity. If you
want to use the Internet to share files with a production partner or client, be aware of the risks.
Disclaimer: Sorry, Mackie Designs cannot offer the service or knowledge that you might
personally need on the broad and seemingly complex issue of networking security. Please seek
guidance from professional computer service types
The two most popular methods of networking in the PC environment are:
Peer To Peer – Usually used when only two computers are connected together. This
configuration is described in detail here.
Server/Router Network – One or more computers connected to a network server and/or router
with a connection hub. You may need to consult other references in order to integrate your
HDR24/96 in a larger network, using the information provided here.
Peer to Peer Networking
Required Cables and Hardware
A peer-to-peer network consists of two computers. One computer is the HDR24/96,
referred to as ‘System #1’.
The other computer, System #2, is the one with which you wish to share files, most
likely an audio workstation in your studio.
The HDR24/96 is equipped with a 100BaseT Ethernet interface. System #2 must have a
100BaseT network card installed.
The two Ethernet interfaces are connected using industry standard CAT-5 Ethernet
cable and connectors.
IMPORTANT: A CROSSOVER cable is required.
Since we’re connecting two Ethernet ports together directly with no intervening network
interfacing or routing devices, a standard Ethernet cable will not work!
When cable shopping, look for one marked “Crossover” or “Reversed”. This is a special
cable wired with input and output connections crossed over from one end to the other,
so data sent by one system will appear at the receiver input of the other.