Maxtor Pipeline HD.2 Series SATA ST3500312CS User Manual
Pipeline hd.2 series sata
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1.0 Introduction 1
- 2.0 Drive specifications 3
- 2.1 Specification summary tables 3
- 2.2 Formatted capacity 8
- 2.3 Default logical geometry 8
- 2.4 Recording and interface technology 8
- 2.5 Physical characteristics 9
- 2.6 Seek time 9
- 2.7 Start/stop times 9
- 2.8 Power specifications 10
- 2.9 Environmental specifications 13
- 2.10 Acoustics emissions 15
- 2.11 Electromagnetic immunity 15
- 2.12 Reliability 16
- 2.13 Agency certification 16
- 2.14 Environmental protection 18
- 2.15 Corrosive environment 18
- 3.0 Configuring and mounting the drive 19
- 4.0 Serial ATA (SATA) interface 23
- 5.0 Seagate Technology support services 33
- Figure 1. Typical 12V startup and operation current profile 11
- Figure 2. Serial ATA connectors 20
- Figure 3. Attaching SATA cabling 20
- Figure 4. Mounting dimensions (for 1000 GB models) 21
- Figure 5. Mounting dimensions (for 500 and 250 GB models) 22
- 1.0 Introduction
- 2.0 Drive specifications
- 2.1 Specification summary tables
- 2.2 Formatted capacity
- 2.3 Default logical geometry
- 2.4 Recording and interface technology
- 2.5 Physical characteristics
- 2.6 Seek time
- 2.7 Start/stop times
- 2.8 Power specifications
- 2.9 Environmental specifications
- 2.10 Acoustics emissions
- 2.11 Electromagnetic immunity
- 2.12 Reliability
- 2.13 Agency certification
- 2.14 Environmental protection
- 2.15 Corrosive environment
- 3.0 Configuring and mounting the drive
- 4.0 Serial ATA (SATA) interface
- 5.0 Seagate Technology support services
- Index