MITSUBISHI ELECTRIC EX200U - Manual (Page 20)

EN-20
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings.
Below is the overview of the OSD menu.
Below is an example about how to set the OSD language.
1. Press MENU/EXIT on the projector or remote
control to turn the OSD menu on. 3. Press to highlight Language and press /
to select a preferred language.
2. Use / to highlight the SYSTEM SETUP:
Basic menu.
4. Press MENU/EXIT twice* on the projector or
remote control to leave and save the settings.
*The first press leads you back to the main menu and
the second press closes the OSD menu.
Current input signal
Main menu icon
Main menu
Sub-menu
Highlight
Press MENU/
EXIT to go
back to the
previous page
or to exit.
Status