Remote control – MITSUBISHI ELECTRIC EX200U User Manual
Page 9
EN-9
ENGLIS
H
Remote control
1.
POWER
Toggles the projector between standby mode and on. See
"Starting up the projector" on page 19
and
down the projector" on page 31
for details.
2.
FREEZE
Freezes the projected image. See
for details.
3.
Left
Selects the desired menu items and makes adjustments.
See
for details.
4.
BLANK
Used to hide the screen picture. See
for details.
5.
VOLUME keys (+, -)
Adjusts the sound level. See
6.
MAGNIFY keys (+, -)
Magnifies or reduces the projected picture size. See
"Magnifying and searching for details" on page 24
details.
7.
MENU/EXIT
Turns on the On-Screen Display (OSD) menu. Goes
back to previous OSD menu, exits and saves menu
settings. See
for details.
8.
Keystone/Arrow keys (
/ Up,
/ Down)
Manually corrects distorted images resulting from an
angled projection. See
"Correcting keystone" on page 24
for details.
9.
AUTO
Automatically determines the best picture timings for the
displayed image. See
for details.
10.
Right/
Activates panel key lock. See
for details.
When the On-Screen Display (OSD) menu is activated,
the #3, #8 and #10 keys are used as directional arrows to
select the desired menu items and to make adjustments.
See
for details.
11.
SOURCE
Displays the source selection bar. See
for details.
12. MODE/ENTER
Depending upon which input signal is selected, selects
an available picture setup mode. See
for details.
Enacts the selected On-Screen Display (OSD) menu
item.
13. TIMER ON
Activates or displays an on-screen timer based on your
own timer setting. See
"Setting the presentation timer"
14. TIMER SET UP
Enters presentation timer setting directly. See
the presentation timer" on page 29
for details.
I
I