Magnadyne M125C - Manual (Page 6)

6
General Operation (continued)
Monitor Adjustment
The monitor has three basic menus: Picture, Option and System. To scroll through the three
basic menus continuously press the MENU button.
PICTURE
VOLUME
BRIGHT
CONTRAST
COLOR
SHARP
HUE
SELECT ADJUST
35
40
50
50
50
50
35
Picture Menu
Press the Menu button on either the monitor front
panel or remote control until the PICTURE menu
screen is displayed. Use the buttons on the
remote to scroll through the menu items and select
from the menu items: VOLUME, BRIGHT, CONTRAST,
COLOR, SHARP and HUE. Then use the but-
tons to make adjustments to the selected item.
Note: NTSC color system will display “HUE”, but PAL
will not.
Option Menu
Press the Menu button on either the monitor front
panel or remote control until the OPTION menu
screen is displayed. Use the buttons on the
remote to scroll through the menu and select from
the menu items: LANG, SCALE, CAM1, CAM2, CAM3
and DVD. Then use the buttons to make adjust-
ments to the selected item.
Note: If SCALE is selected “ON” then the monitor will
display a distance grid when the reverse camera is
selected. The grid is a reference point and can not be
used as an accurate measurement.
System Menu
Press the Menu button on either the monitor front
panel or remote control until the SYSTEM menu
screen is displayed. Use the buttons on the
remote to scroll through the menu and select from the
menu items: COLOR-SYS, BLUE BLACK, HORIZON-
TAL, VERTICAL and ZOOM. Then use the but-
tons to make adjustments to the selected item.
OPTION
LANG
SCALE
CAM1
CAM2
CAM3
DVD
SELECT ADJUST
ENG
OFF
NORMAL
NORMAL
NORMAL
NORMAL
SYSTEM
COLOR-SYS
BLUE BLACK
HORIZONTAL
VERTICAL
ZOOM
SELECT ADJUST
AUTO
OFF
0