Minolta DIMAGE SCAN DUAL II AF-2820U - Manual (Page 86)

86
SCAN SETTINGS
4. Enter the desired output resolution from the
output resolution drop-down list.
• Values can also be entered into the output resolution list
box directly.
5. The dimensions of the cropping frame are
displayed in the input size text boxes.
• Values can be entered directly or by resizing the cropping
frame.
• The values will change if a different unit of measure is
selected.
• The scanning area size can't be changed if the Input Size
is locked.
6. Enter the desired output size (maximum 3 digits).
• The output size is limited by the maximum resolution of
the scanner.
• The values will change if a different unit of measure is
selected.
• The output size cannot be changed when the unit list
box is set to pixels.
• The scanning area size can be changed proportionally
(within the resolution limits) when the Output Size is
locked.
7. The input scan resolution text box is set to
the lowest input (scan) resolution
necessary to achieve the desired output
size and resolution.
• Input scan resolutions can also be selected from
the drop down list or entered directly.
• Click on
to lock the
settings. The icon will
change to
. Click again to
unlock.
• The magnification te
xt box
displays the output/input siz
e ratio as a percentage
.
• Magnification v
alues can be
entered directly
.